近日有一台设备无法启动，经查CPU为STOP状态
诊断信息表示之前的组态和当前的组态不一致，重新下载硬件组态后，恢复正常
那么问题在于，什么会导致这种情况发生？
多谢多谢！
诊断信息如下：
Diagnostic buffer of module CPU 314C-2 DP
Order No./ Description Component Version
6ES7 314-6CH04-0AB0 Hardware 3
- - - Firmware V 3.3.8
Boot Loader Firmware expansion A 32.9.9
Rack: 0
Slot: 2
Serial number: S Q-D6U073592013
Event 1 of 116: Event ID 16# 49A0
STOP caused by parameter assignment error or unpermissible difference between preset and actual configuration: startup disabled
No relevance for user (SDB no.): 1001
No relevance for user (Z2): 0000 (Z3): 0000
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
External error, Incoming event
03:41:13.229 PM 02/16/2016
(Coding: 16# 49A0 FF64 C17B 03E9 0000 0000)
